Huntron Scanners

Add Scanning Capabilites to Your Huntron Tracker Model
30
System
Adding
a Huntron® Scanner to your Tracker Model 30 system lets
you
access components using standard DIP clips and
cables, custom cables to PCB
connectors or interface to a bed-of-nails.You can compare one component with
another
in real-time (64 pins max.) or use your PC to automate testing and
scan
up to 128 pins.Huntron Scanners can be used with a
Huntron Access Prober to
provide Common line connections
while the Prober is probing a PCB. This method
gives you
up to 128 selectable Commons to use. For example, you can connect
the
Scanner to a connector on a PCB mounted in the Prober
using a common ribbon
style cable. While the Prober is
probing, any one of the lines on the connected
ribbon
cable can be selected as the Common reference. This would provide
you
true point-to-point testing capabilities.Note: The
ProTrack Scanner will be
replaced by the Scanner II
and/or the Scanner 31S effective 1/1/2008. This
applies
to commercial sales only.Scanner II and Scaner 31S users may want
to
consider these Optional Accessories to enhance their
test
capabilities.
Highlights:
·
The Scanner II and Scanner 31S accessories add
scanning
capability to the Tracker Model 30
· All Scanners have a
minimum 64
pin capability
· The
Scanner II can scan up to 128 pins when the A and
B
channels are combined
· The
Scanner 31S use standard IDC
style
connectors
· The Scanner II
uses the common SCSI-2 (68 pin)
style
connectors
· Up to 8 Scanner
IIs can be “daisy-chained” to increase the
available
number of test pins
Selecting Accessories for your
Scanner IIThe
Scanner II accessories for interfacing to
your printed circuit board come "ala
carte". This means
that you select the accessories you want included with
your
Scanner. Choose from SMT or through-hole style DIP
clip and cable kits (Scanner
Adapter required with
Scanner II) or a mutli-pin breakout cable. Details
on
these accessories are provided on this
page